In order to investigate rock fracture and fragmentation mechanisms under dynamic loading, a cylindrical rock model with a centralized borehole is developed through the use of AUTODYN code. According to the material properties and loading conditions, four kinds of equation of state (EOS), linear, shock, compaction and ideal gas, are applied to the four kinds of materials employed in this numerical model. A modified principal stress failure criterion is applied to determining material status, and a well-behaved explosive, PETN, and a relatively homogeneous igneous rock, diorite, are used in this rock model. A single centrally located line source of explosive is fired numerically to produce the dynamic loadings operating on the surrounding rocks. This numerical model is applied to actual blasting conditions. The rock failure mechanism under dynamic loading is first analyzed, and then the influences of the following factors on rock fracturing are discussed: (a) coupling medium, (b) confinement, (c) boundary condition, (d) initiation location in an explosive column, and (e) air ducking. The results show that all these factors have significant effects on rock fracturing under dynamic loading. r 2007 Elsevier Ltd. All rights reserved.