Non-destructive testing for determination of compressive strength concrete
首发时间:2008-05-19
Abstract:Testing the concrete quality during construction process and acceptable assessment before putting them into operation is one of important phases in order to ensure the quality of works. Thus testing method has to achieve result close to the real quality of works. For that reason, management and checking the quality of concrete is a very important job, not only to improve life span of the works, but also to enhance construction speed and to meet the technical and economic demands. In reality, there are two methods to determine the concrete strength (destructive testing and non- destructive testing). However, destructive testing is very complicated during making sample and may have effect to structures; while non- destructive testing by using combination of ultrasonic equipment and hammer gun for determination of compressive strength[1], so the result has not high fidelity and sometimes delay the rate of progress of execute the works. From that issue, this paper puts forward the preliminary research on the measurements to carry out the fast concrete testing with non-destructive equipments
点击查看论文中文信息
Non-destructive testing for determination of compressive strength concrete
摘要:检测混凝土质量在混凝土施工过程和工程运行前评价验收中是工程质量保障的主要环节之一。因此检测方法要尽可能地反映混凝土工程的真实质量。混凝土质量检测管理是一份不容忽视的工作,这对延长工程的寿命、促进工程施工进度,满足各项技术与经济标准等作出应有的贡献。 实际上有两种确定混凝土强度的基本方法(有损检测与无损检测方法)。然而损检测法在抽样过程时显得复杂,同时对工程结构有所影响。无损检测法使用声波脉冲与反弹锤相结合的方法,所以正确率不大,有时减慢混凝土施工进度。 从上面的论述,本文就对于用无损设备确定混凝土强度快捷方法提出初步的研究成果。
基金:
论文图表:
引用
No.2150622201012111****
同行评议
共计0人参与
勘误表
Non-destructive testing for determination of compressive strength concrete
评论
全部评论0/1000