Video+PON方案中关于以太网交换机的硬件设计
首发时间:2010-04-14
摘要:Video+PON方案用于视频监控系统相对于传统视频监控系统具有节省光缆资源、成本较低等优点。针对用户需求,在Video+PON方案基础上设计了10M以太网交换机。完成了OLT端和ONU端硬件设计,并在OLT端利用FPGA完成了SMII接口与MII接口相互转换电路设计,给出了基于ModelSim.SE.v6.2b软件的时序仿真。
关键词: PON SMII MII FPGA RTL8316B
For information in English, please click here
The hardware design of Ethernet switch in Video + PON program
Abstract:Video + PON program used in the video surveillance system has more unparalleled advantages than the traditional video surveillance system, such as saving resources, low cost and so on. Aiming at user needs, this paper describes the design of 10M Ethernet switch on the basis of Video + PON program, completes the hardware design of the OLT side and the ONU side. The design of conversion circuit of the SMII interface and the MII interface used FPGA is completed on the side of OLT and is given the timing simulation based on ModelSim.SE.v6.2b.
基金:
论文图表:
引用
No.4191952666512712****
同行评议
共计0人参与
勘误表
Video+PON方案中关于以太网交换机的硬件设计
评论
全部评论0/1000