A Multisensor Fusion Architecture for Two Phase Flow Process Parameters Measurement

首发时间:2013-08-19
Abstract:Measuring the process parameters of two-phase flow has remained a widely discussed topic within the field of two-phase flow and measuring techniques, since to achieve this goal, a thorough understanding of flow mechanics and measuring techniques is necessary. However, the currently existing flow meters still could not meet the requirement from both the industrial and academic research, because most of the problems encountered in multiphase flow measurements arise from an increasing number of the characteristic flow parameters as compared with those in single-phase flows. This paper introduces a multi-sensor architecture of measuring process parameters of two-phase flow in a horizontal pipeline. Multi-sensor fusion techniques combine data and related information from spatially and temporally distributed sensors to achieve more complete, specific and reliable inferences than that could be achieved by using a single, independent sensor. The integration or fusion of data from each individual sensor eliminates possible redundancy and contradictions and consequently improves accuracy and reduces uncertainty of the measurement. The proposed architecture consists of a cone meter, a dual-plane Electrical Resistance Tomography (ERT) system, a set of parallel conductance ring sensors and pressure and temperature gauges. The function structure of sensor fusion is presented with data fusion algorithm. A case study on gas-water two phase flow is then presented with an improved results by using this architecture.
keywords: Detection Technology and Automatic Device Multiphase Flow Measurement Multisensor Fusion Data Fusion
点击查看论文中文信息
用于两相流过程参数检测的多传感器融合架构
摘要:两相流过程参数检测一直是多相流领域以及检测领域内的研究热点,若要实现准确的测量需要对两相流动机里与对应的检测手段有深入的理解。由于流动过程复杂,待测参数多,目前的两相流检测仪表尚不能满足工业与科研领域的研究需求。本文提出一种用于两相流过程参数检测的多传感器融合架构,利用不同时间与空间的多传感器数据资源,通过对各局部测量信息的综合,消除多传感器信息之间可能存在的冗余和矛盾,并加以互补,降低其不确定性,实现比单一信息源对被测过程更完全、准确、可靠的测量和描述。本架构包含一台内锥流量计,一套双截面电阻层析成像系统,一套环形电导式传感器阵列以及多块温度与压力仪表。同时给出了多传感器融合的功能结构以及对应的融合算法,并通过水平气水两相流动态检测试验对该架构进行验证。
关键词: 检测技术与自动化装置 多相流检测 多传感器融合 数据融合
基金:
论文图表:
引用

No.****
同行评议
共计0人参与
勘误表
用于两相流过程参数检测的多传感器融合架构
评论
全部评论