基于剪式单元放缩机构刚度模型的建立与仿真
首发时间:2016-01-18
摘要:剪式单元在构造放缩机构时存在刚度不足的缺点,为了建立剪式单元放缩机构的刚度模型,首先对单元进行受力分析,得到了每个单元各个节点的力学模型;利用力学模型,对各个单元中杆件的变形情况进行了分析计算,通过角度关系来表达变形,建立了放缩机构的刚度模型;对各个参数取特定的值,利用刚度模型计算刚度值,建立三维模型并进行仿真验证,结果表明该刚度模型是可靠的。?????
关键词: 剪式单元 放缩机构 受力分析 刚度模型 仿真?????
For information in English, please click here
Deployable Structure Stiffness Model Building and Simulation Based On Scissor-Like Element
Abstract:When scissor-like element is used to construct deployable structures, its stiffness is not sufficient. In order to build the stiffness model of deployable structures based on scissor-like elements, the force condition of every element is analyzed. Next, the force model of every joint is built. Based on the force model, the deformation of the links in every element is calculated, then the deformation status is expressed with the angle relation. Based on all the calculations, the stiffness model is built. In a particular situation, all the parameters are assigned specific value, then the stiffness value is calculated by using the stiffness model. To verify the reliability of the stiffness model, its 3D model is built in Solidworks and its deformation is simulated in Ansys Workbench, finally the result shows that the stiffness model is reliable.?????
Keywords: Scissor-like Element Deployable Structures Force Analysis Stiffness Model Simulation?????
基金:
论文图表:
引用

No.4675592112315514****
同行评议
共计0人参与
勘误表
基于剪式单元放缩机构刚度模型的建立与仿真
评论
全部评论