Experiment research on influence of guide vane on vortex-induced vibration characteristics of bluff section
首发时间:2022-06-22
Abstract:In order to study the effect of guide vane on the vortex-induced vibration characteristics of blunt steel box girder section, this paper first compares the vortex-induced vibration response of the original blunt steel box girder section and the blunt box girder with three different sizes and forms of guide vanes by wind tunnel test. Secondly, the vortex-induced vibration responses of blunt box girders with three different forms and sizes of guide vanes are compared by numerical simulation. Finally, through the comparative analysis of the flow field of the original blunt body section and the inverted L-shaped guide vane with different sizes, the reason for the vortex vibration phenomenon of the blunt body section is found. The results show that the horizontal guide plate has good vibration suppression effect on vertical bending vortex vibration, but it will increase the vibration amplitude of torsional vortex vibration. The inverted L-shaped guide vane has a very obvious suppression effect on the torsional vortex vibration and vertical bending vortex vibration of the blunt body section. By comparing the flow field, it is found that the vortex at the top of the section is eliminated, and the large-scale vortex at the tail is decomposed into smaller-scale vortex, so as to achieve the purpose of suppressing vortex vibration.
keywords: bridge wind engineering bluff body steel box girder guide vane windtunnel test numerical simulation vortex vibration
点击查看论文中文信息
导流板对钝体钢箱梁断面的涡振特性影响研究
摘要:为了研究导流板对钝体钢箱梁截面涡激振动特性的影响,本文首先通过风洞试验,对比了原始钝体钢箱梁截面和分别设置有三种不同尺寸、形式的导流板时钝体箱梁的涡激振动响应;其次采用数值模拟的方法对比了设置三种不同形式、尺寸导流板时钝体箱梁的涡激振动响应;最后通过对原始钝体截面和分别设置有不同尺寸倒L形导流板时的流场进行对比分析,找到了钝体截面产生涡振现象的原因。结果表明:水平导流板对竖向弯曲涡振的抑振效果较好,但会增大扭转涡振的振动幅值。倒L形导流板对钝体截面扭转涡振和竖向弯曲涡振都有非常明显的抑制效果,通过对流场的对比发现其消除了截面顶部的涡,并将尾部的大尺度涡分解为较小尺度的涡,从而达到了抑制涡振的目的。
基金:
引用
No.****
动态公开评议
共计0人参与
勘误表
导流板对钝体钢箱梁断面的涡振特性影响研究
评论
全部评论0/1000