2015-03-18
SolidWorks Simulation模拟实验，证明了SolidWorks Simulation对热声机静态模拟的可行性。并用SolidWorks Simulation对结构进行改良，提出了真空罩的改良方法。同时对
华中科技大学能源与动力工程学院,中科院理化技术研究所,中科院理化技术研究所
#能源科学技术#
acceleration added to the system, which consequently reduce navigation accuracy. In this paper, a simulation of
2009-10-09
College of Automation, Harbin Engineering University,College of Automation, Harbin Engineering University
Fang Ling,,Liu Jianye,Lai JiZhou,Wang kai
simulation technique for the new type land-based radio navigation system that uses spread spectrum technology
2011-02-03
Navigation Research Centre, College of Automatic Engineering,Nanjing University of Aeronautics and Astronautics,210016,Navigation Research Centre, College of Automatic Engineering,Nanjing University of Aeronautics and Astronautics,210016,Navigation Research Centre, College of Automatic Engineering,Nanjing University of Aeronautics and Astronautics,210016,Navigation Research Centre, College of Automatic Engineering,Nanjing University of Aeronautics and Astronautics,210016
Mohammed Mokhtar Eisa,Thomas Oromo,Adam Ishag,John Leju,Nahla Mustafa,Nabela Hamed
level simulation, ANN appears to be a promising tool.
2010-03-30
College of Hydrology and Water Resources, Hohai university,College of Hydrology and Water Resources, Hohai university,College of Hydrology and Water Resources, Hohai university,College of Hydrology and Water Resources, Hohai university,College of Hydrology and Water Resources, Hohai university,College of Hydrology and Water Resources, Hohai university
2010-12-15
依据某空调制冷公司提供的设计图纸利用SolidWorks设计软件首先对某离心式高压冷水机组建立三维几何模型，然后将其导入到SolidWorks软件的仿真插件SolidWorks Simulation
武汉理工大学机电工程学院,克拉玛依新科澳化工（集团）有限责任公司,麦克维尔空调制冷（武汉）有限公司
#机械工程#
AL-Gabri Malek,LI Chunlin ,Wang Bo
network in details; discuss the simulation process and implementation of wireless network on the basis of
2010-01-13
Wuhan University of Technology,Wuhan University of Technology,Wuhan University
Jiang Yaodong,Zhao Yixin,Zhu Jie
The numerical approach to translatory coal bumps analysis is used to examine the effects of joint and coal seam stiffness on the outburst velocity, deformation magnitude of the opening wall and plastic zone length in the coal seam. A series of tests are performed by varying the joint dip angles, spacing normal to joint tracks, joint block size and coal seam stiffness ratio to the surrounding rock. Results of joint and coal seam stiffness effects analysis indicate that joint dip angle, interval spacing, block size and coal seam stiffness ratio have profound influences on coal bumps. The increasing of interval spacing and joint block size can generate larger roadway deformation, lower roadway deformation velocity and longer plastic region in the coal seam. Higher stiffness ratio can also result in larger deformation, higher deformation velocity of opening wall. Coal bumps conditions deteriorate as the dip angle rotated to 90 degree or the elastic zones disappear in the whole active zone of coal seam for different spacing distributions.
2006-03-23
教育部博士点基金（20030290001）
China university of mining & technology,China university of mining & technology,China university of mining & technology
Yonggang Li,Shifeng Mao,Huimin Li,Shuman Xiao,Zejun Ding
In this paper, we have developed a Monte Carlo (MC) simulation method for scanning electron
2009-01-06
教育部博士点基金项目（10574121）
National Natural Science Foundation（10025420）
National Natural Science Foundation（0）
Hefei National Laboratory for Physical Sciences at Microscale and Department of Physics, University of Science and Technology of China,Hefei National Laboratory for Physical Sciences at Microscale and Department of Physics, University of Science and Technology of China,USTC-HP Laboratory of High Performance Computing, University of Science and Technology of China,Hefei National Laboratory for Physical Sciences at Microscale and Department of Physics, University of Science and Technology of China,Hefei National Laboratory for Physical Sciences at Microscale and Department of Physics, University of Science and Technology of China
#Physics#
2013-12-06
机械爪片的结构经常采用经验进行设计，其结构的合理性及可靠性有待研究。通过Solidworks对机械爪片进行了建模，并应用Solidworks Simulation有限元分析分析插件对所建立的模型进行
北京邮电大学自动化学院，北京 100876,北京邮电大学自动化学院，北京 100876
#机械工程#
2019-11-20
针对非标设备制造加工车间内吊装能力不足的问题，设计了一款专用生产线辅助起吊装置，通过对其结果进行受力分析计算，然后利用现代模拟软件SolidWorks Simulation对计算结果进行模拟分析校核
提示
