This paper describes a clutter suppression approach and the corresponding moving target imaging algorithm for a multichannel in azimuth high-resolution and wide-swath (MC-HRWS) synthetic aperture radar (SAR) system. Incorporated with digital beamforming processing, MC-HRWS SAR systems are able to suppress the Doppler ambiguities to allow for HRWS SAR imaging and null the clutter directions to suppress clutter for ground moving target indication. In this paper, the degrees of freedom in azimuth for the multichannel SAR systems are employed to implement clutter suppression. First, the clutter and moving target echoes are transformed into the range compression and azimuth chirp Fourier transform frequency domain, i.e., coarse-focused images formation, when the clutter echoes are with azimuth Doppler ambiguity. Considering that moving targets are sparse in the imaging scene and that there is a difference between clutter and a moving target in the spatial domain, a series of spatial domain filters are constructed to extract moving target echoes. Then, using an extracted moving target echo, two groups of signals are formed, and slant-range velocity of a moving target can be estimated based on baseband Doppler centroid estimation algorithm and multilook cross-correlation Doppler centroid ambiguity number resolving approach. After the linear range cell migration correction and azimuth focus processing, a well-focused moving target image can be obtained. In addition, the proposed clutter suppression and imaging approach is not only adapted for uniformly displaced phase center sampling but also for the nonuniform sampling cases. Some simulation experiments are taken to demonstrate our proposed algorithms. Finally, some real measured data results are presented to validate the theoretical investigations and the proposed approaches.