-
49浏览
-
0点赞
-
0收藏
-
0分享
-
739下载
-
0评论
-
引用
期刊论文
Determination of surface heat-transfer coefficients of steel cylinder with phase transformation during gas quenching with high pressures
H. Cheng et al./Computational Materials Science 29(2004)453-458,-0001,():
In numerical simulation of quenching process, the boundary conditions of temperature field and stress field are very important, in which the boundary conditions of temperature field are very complicated. In order to simulate the thermal strains, thermal stresses, residual stresses and microstructure of the steel during gas quenching by means of the numerical method, it is necessary to obtain an accurate boundary condition of temperature field. The surface heattransfer coefficient is a key parameter. The explicit finite difference method, non-linear estimate method and the experimental relation between temperature and time during quenching have been used to solve the inverse problem of heat conduction. The relationships between surface temperature and surface heat-transfer coefficient of cylinder have been given. The non-linear surface heat-transfer coefficients include the coupled effects between phase transformation and temperature. In calculation, physical properties were treated as the function of temperature and volume fraction of constituent. The results obtained have been shown that this technique can determine effectual the surface heat-transfer coefficients during gas quenching.
【免责声明】以下全部内容由[程赫明]上传于[2009年10月30日 13时26分03秒],版权归原创者所有。本文仅代表作者本人观点,与本网站无关。本网站对文中陈述、观点判断保持中立,不对所包含内容的准确性、可靠性或完整性提供任何明示或暗示的保证。请读者仅作参考,并请自行承担全部责任。
本学者其他成果
同领域成果