Based on the investigation performed in Part I of this series, numerical results for the interaction between a semiinfinite interface crack and multiple subinterface matrix microcracks in three kinds of material combinations are given in Part II. The major interaction behaviors are discussed in detail. Special attention is focused on the influences of the different material combinations, the T-stress, the orientation angles, and the location angles of the microcracks on the local stress intensity factor at the interface crack tip. In addition, the variable tendencies of the interaction effect induced from change of the distance between the interface crack tip and the centers of the microcracks are studied. It is concluded that the different material combinations introduced in this paper have little influence on the variable tendencies of the effect, but have significant influence on the effect in magnitude. Detailed comparisons of the results with those in a homogeneous orthotropic material show that the dissimilar materials shift the maximum amplification angle, the maximum shielding angle, the neutral shielding angle, and the neutral T-stress angle, respectively.