-
48浏览
-
0点赞
-
0收藏
-
0分享
-
433下载
-
0评论
-
引用
期刊论文
Study on Processing of Ultrahigh Molecular Weight Polyethylene/Polypropylene Blends
Journal of Applied Polymer Science, Vol. 94, 977-985 (2004),-0001,():
The processing of ultrahigh molecular weight polyethylene (UHMWPE) by the addition of polypropylene (PP) and high-density polyethylene (HDPE) was investigated. The results show that the addition of PP improves the processability of UHMWPE more effectively than does the addition of HDPE. UHMWPE/PP blends can be effectively processed with a twin-roller and general singlescrew extruder. In the extrusion of UHMWPE/PP blends, PP is enriched at the surface of the blend adjacent to the barrel wall, thus increasing the frictional force on the wall; the conveyance of the solid down to the channel can then be carried out. The melt pool against the active flight flank exerts a considerable pressure on the UHMWPE powder in the passive flight flank, which overcomes the hard compaction of UHMWPE. The PP penetrates into the gaps between the particles, acting as a heat-transfer agent and adhesive, thus enhancing the heat-transfer ability in the material.
【免责声明】以下全部内容由[李惠林]上传于[2005年02月25日 19时09分37秒],版权归原创者所有。本文仅代表作者本人观点,与本网站无关。本网站对文中陈述、观点判断保持中立,不对所包含内容的准确性、可靠性或完整性提供任何明示或暗示的保证。请读者仅作参考,并请自行承担全部责任。
本学者其他成果
同领域成果