您当前所在位置: 首页 > 学者

刘青

  • 109浏览

  • 0点赞

  • 0收藏

  • 0分享

  • 457下载

  • 0评论

  • 引用

期刊论文

Optimal control of secondary cooling for medium thickness slab continuous casting

刘青X.-Y. Wang Q. Liu* B. Wang X. Wang J.-S. Qing Z.-G. Hu and Y. H. Sun

Ironmaking and Steelmaking,-0001,():

URL:

摘要/描述

A software to simulate the solidification, heat transfer and water flowrate distribution in slab continuous casting was developed by establishing a mathematical model for the heat transfer and solidification in medium thickness slab casting. This model was validated by pin shooting and surface temperature measurement experiments. A reasonable target surface control temperature was found by testing the high temperature mechanical properties of Nb bearing ship plate steel,and then the water flowrate of each loop of the secondary cooling zone was determined by the software. The influence of uneven secondary cooling in the slab width direction on the quality of the slab was also investigated, which provided data for the optimisation of the secondary cooling of the slab caster. On the basis of the above research, an optimisation scheme for a secondary cooling system was proposed. Experimental results showed that the quality of the slab was significantly improved after optimisation. The centreline macrosegregation was reduced, and the ratio of equiaxed grains was increased by 3?18%. In addition, the transverse cracking of the slab was almost eliminated.

【免责声明】以下全部内容由[刘青]上传于[2012年05月05日 00时12分58秒],版权归原创者所有。本文仅代表作者本人观点,与本网站无关。本网站对文中陈述、观点判断保持中立,不对所包含内容的准确性、可靠性或完整性提供任何明示或暗示的保证。请读者仅作参考,并请自行承担全部责任。

我要评论

全部评论 0

本学者其他成果

    同领域成果