-
50浏览
-
0点赞
-
0收藏
-
0分享
-
89下载
-
0评论
-
引用
期刊论文
Self-compensated high-pressure sensor with a high-birefringence fiber Bragg grating and a bulk modulus
Optical Engineering 44(2005)014401(1-5),-0001,():
High-pressure measurement is made by demodulating Bragg grating peak splitting caused by transverse stress differences in the core of a high-birefringence (HB) single-mode fiber, which is bonded on the exterior surface of a free active element bulk modulus. The two orthogonally polarized signals reflected from the HB fiber Bragg grating (FBG) can be independently detected with a simple FBG interrogation system, which is based on the light intensity measurement method. In addition, the cross-sensitivity of the FBG sensor can be self-compensated by this method. The measurement principle is introduced, and preliminary experimental results indicate that the measurement sensitivity is estimated to be~12 pm/N in a linear measurement range from 0 to 120 N.
【免责声明】以下全部内容由[赵勇]上传于[2009年11月30日 12时23分59秒],版权归原创者所有。本文仅代表作者本人观点,与本网站无关。本网站对文中陈述、观点判断保持中立,不对所包含内容的准确性、可靠性或完整性提供任何明示或暗示的保证。请读者仅作参考,并请自行承担全部责任。
本学者其他成果
同领域成果