宁建国
弹药工程,爆炸问题的模拟与仿真,冲击动力学及损伤与断裂力学等方面
个性化签名
- 姓名:宁建国
- 目前身份:
- 担任导师情况:
- 学位:
-
学术头衔:
博士生导师
- 职称:-
-
学科领域:
固体力学
- 研究兴趣:弹药工程,爆炸问题的模拟与仿真,冲击动力学及损伤与断裂力学等方面
宁建国(博士) 1981年9月至1985年6月在兰州大学数学力学系固体力学专业学习, 并获得工学学士学位。1985年9月被推荐到兰州大学力学系读硕士研究生, 导师为程昌钧教授, 研究方向为“分枝理论在结构稳定性中的应用”, 于1988年6月获得理学硕士学位。1988年9月至1992年元月在太原工业大学固体力学专业攻读博士学位, 导师为杨桂通教授, 研究方向为“弹塑性动力学”,并取得工学博士学位,1992年6月至1994年5月在北京大学力学系做博士后研究, 从事结构动力学,力学中的数值方法和动态稳定性等方面的研究工作。1994年6月分配到北京理工大学力学工程系工作,1994年7月晋升为副教授, 1998年7月破格晋升为教授。现在为北京理工大学机电工程学院教授,博士生导师。目前,主要从事弹药工程,爆炸问题的模拟与仿真,冲击动力学及损伤与断裂力学等方面的科研与教学工作。作为项目负责人已完成国家自然科学基金三项(批准号为19402002,49876025, 19972012),作为项目负责人分别承担国家自然科学基金一项(批准号为10272023),国家安全重大基础项目―专题项目一项。此外,担任中国兵工学会应用力学专业委员会副主任委员,担任中国力学学会理性力学和力学中的数学方法专业委员会委员,担任计算力学学报编委,担任中国力学学会科普工作委员会委员,担任中国力学学会固体力学专业委员会塑性力学专业组成员,担任中国力学学会爆炸力学专业委员会计算爆炸力学专业组成员,北京理工大学教学工作指导委员会委员,北京理工大学教学科研产业工作委员会委员。在各种学术刊物上发表论文80余篇,被Sci,Ei检索20余篇,获省部级科技进步二等奖一项。
-
主页访问
3388
-
关注数
0
-
成果阅读
731
-
成果数
10
【期刊论文】刚粘塑性强化球形薄壳在撞击体作用下的大变形动力分析*
宁建国, 杨桂通
固体力学学报,1994,15(2):111~120,-0001,():
-1年11月30日
本文研究了在平头圆柱体的冲击下,薄球形壳的动力大变形。通过等度量变换,给出了球壳的变形模态。在Perzyna和Symonds的粘塑性本构模型基础上。设材料服从Mises屈服条件,并假定弯矩和膜力不耦合。根据刚粘塑性强化材料的变分原理,给出球壳的运动方程。数值结果与实验进行了比较,二者吻合较好。
球壳,, 冲击,, 等距变换,, 粘塑性
-
90浏览
-
0点赞
-
0收藏
-
0分享
-
177下载
-
0评论
-
引用
【期刊论文】悬臂高梁在静动态载荷作用下1)侧向失稳的实验研究
宁建国
,-0001,():
-1年11月30日
本文进行了平头圆柱形弹体对铝合金悬臂高梁自由端正撞击引起侧向失稳的实验研究。通过多种不同尺寸梁的实验,研究了梁在静动态载荷下的侧向失稳临界载荷值及屈曲模态。最后给出一个在撞击载荷下,计算悬臂高梁侧向失稳临界冲击动能值的经验公式。
悬臂高梁,, 撞击,, 侧向失稳
-
72浏览
-
0点赞
-
0收藏
-
0分享
-
138下载
-
0评论
-
引用
宁建国
固体力学学报,1998,19(4):313~320,-0001,():
-1年11月30日
通过引入曲面弯曲的等度量变换,给出了受冲击球壳的变形模态;接着,分别假定材料为弹性或刚塑性,基于能量守恒,得到了壳体和撞击体在运动过程中的控制方程;最后,对所得到的控制方程进行了数值求解,并与实验数据作了比较,发现二者具有较好的一致性。
球形薄壳,, 冲击,, 弹塑性,, 动力分析
-
57浏览
-
0点赞
-
0收藏
-
0分享
-
249下载
-
0评论
-
引用
【期刊论文】Necessary conditions of internal necking between microvoids in ductile materials*
宁建国, NING Jianguo and HUANG Zhuping
PROGRESS IN NATURAL SCIENCE 1998. 6: 726~732,-0001,():
-1年11月30日
Under the action of external loads, the critical condition of fracture in ductile materials is closely re-lated to the strong interactions among internal microdefects at the later stage of deformation. By means of Riemann's analytical integration, necessary conditions for the internal necking between adjacent elliptical voids under plane strain conditions are studied. The influences of the aspect ratio of elliptical voids, the distance between two voids, and the angle of the straight line connecting the central points of two voids with respect to the tensile direction on the above-mentioned necessary conditions are also discussed.
ductile material,, mlcrodefects,, Internal necking,, Rlemann Integration,,
-
52浏览
-
0点赞
-
0收藏
-
0分享
-
179下载
-
0评论
-
引用
宁建国, 宁建国①, 陈龙伟①②
中国科这E辑工程科学材料科学,2004,34 (7): 776~792,-0001,():
-1年11月30日
针对Euler方法中的三维多介质界面处理问题,把模糊数学方法引入到Euler方法中,提出了模糊界面处理方法,用于Euler方法中多介质计算问题,描述界面、设计输运方案及计算输运量;以无黏性、无热传导的三维弹塑性流体动力学控制方程组为依据,考虑固体的应力及应变,对不同装药结构的射流进行了数值摸似,证明了模糊界面方法对三维多介质计算是行之有效的。
Euler方法,, 多介质,, 模糊界面处理,, 射流,, 三维数值模拟
-
43浏览
-
0点赞
-
0收藏
-
0分享
-
159下载
-
0评论
-
引用
【期刊论文】ELASTIC INSTABILITY OF AN ORTHOTROPIC ELLIPTIC PLATE*
宁建国, Cheng Chang-jun, Ning Jian-guo
Applied Mathematics and Mechanics (English Edition, Vol. 12, No.4, Apr. 1991),-0001,():
-1年11月30日
On the basis of yon Karman equations and using the general bifurcation theory, the elastic instability of an orthotropic elliptic plate whose edge is subjected to a uniform plane compression is discussed. Following the well-known Liapunov-Schmidt process the existance of bifurcation solution at a simple eigenvalue is shown and the asymptotic expression is obtained by means of the perturbation expansion with a small parameter. Finally, by using the finite element method, the critical loads of the plate are computed and the post-buckling behavior is analysed. And also the effect of material and geome-tric parameters on the stability is studied.
orthotropic,, elliptic plate,, elastic instability,, critical load,, bifurcation solution,, post-buckling behavior
-
76浏览
-
0点赞
-
0收藏
-
0分享
-
103下载
-
0评论
-
引用
【期刊论文】DYNAMIC RESPONSE OF PLASTIC SPHERICAL SHELLS UNDER IMPACT
宁建国, Liu hai-yan, Hu Yin-yan, Ningjian-guo
,-0001,():
-1年11月30日
This paper presents a theoretical analysis of the large deformation problem of a plastic spherical shell impacted by a missile. Firstly, a deformation mode of the spherical shell is given by introducing isometric transformation. Secondly, the large deformation problem of a rigid-plastic spherical shell is solved. A comparison between the theoretical results and the experimental ones indicates that the two groups of results are in conformity with each other.
-
78浏览
-
0点赞
-
0收藏
-
0分享
-
116下载
-
0评论
-
引用
宁建国
固体力学学报,1998,19(4):313~320,-0001,():
-1年11月30日
通过引入曲面弯曲的等度量变换,给出了受冲击球壳的变形模态;接着,分别假定材料为弹性或刚塑性,基于能量守恒,得到了壳体和撞击体在运动过程中的控制方程;最后,对所得到的控制方程进行了数值求解,并与实验数据作了比较,发现二者具有较好的一致性。
球形薄壳,, 冲击,, 弹塑性,, 动力分析
-
115浏览
-
0点赞
-
0收藏
-
0分享
-
811下载
-
0评论
-
引用
宁建国, 刘海燕, 王云艳, 杨桂通
Journal of Beijing Institute of Technology, 1999, Vol. 8, No.1,-0001,():
-1年11月30日
目的 研究球形塑性壳在撞击载荷作用下的动态破坏行为。方法 通过引入等度量变换,给出了球壳的变形模态;利用能量平衡给出了壳体在撞击载荷作用下大变形动态破坏的运动控制方程;采用Runge-Kutta方法求解了该运动控制方程。 结果 给出了冲击力,窝陷半径和中心点位移随时间的变化关系以及最大窝陷半径、最大中心点位移和最大冲击力随弹体速度的变化关系。结论 本文结果与实验结果有比较好的一致性。
球壳, 撞击, 大变形, 动态破坏
-
86浏览
-
0点赞
-
0收藏
-
0分享
-
213下载
-
0评论
-
引用
【期刊论文】AN ARITHMETIC OF THE MOVING INTERFACE FOR THREE-DIMENSIONAL FLOWS
宁建国, Long-weiChen, Jian-guo Ning
,-0001,():
-1年11月30日
Motivated by the need for three-dimension methods for interface calculations that can deal with topology change, we describe a generally applicable numerical method built from Youngs technique. The usefulness of the method is illustrated by moving interface restructure in each mix cell and calculation of transport volume among cells.
-
62浏览
-
0点赞
-
0收藏
-
0分享
-
73下载
-
0评论
-
引用