A novel combined soft switching technique and a novel circuit topologies family of the static inverter with high frequency pulse dc link are proposed in this paper. The topology structure is constituted of isolated high frequency pulse DC link circuit and DC/AC inverter. In order to overcome the duty cycle D of the one transistor forward mode Static Inverter less than 0.5 and the circuit topology of the interleaved forward mode Static Inverter more complicated, the duty cycle extension of high frequency pulse DC voltage is proposed in this paper. The steady operation principle of the active clamp forward mode high frequency pulse dc link static inverter with duty cycle extension and the control strategy of three-state discrete pulse modulation hysteresis current are deeply investigated. The design criteria for the key circuit parameters are gained. By using combined soft switching technique and the duty cycle extension of high frequency pulse DC voltage, a designed and developed 750VA 27VDC/115V400HzAC prototype has the advantages such as high efficiency, high power density, high reliability, high steady precision, fast dynamical response, strong ability of over-load and short-circuit, and low THD of output voltage.

提出了以双管反激变换器为基础的全桥式高频交流环节AC/AC变换器拓扑。该拓扑由输入周波变换器、高频储能式变压器、输出周波变换器以及输入、输出滤波器构成，能够将不稳定劣质的交流电变换成同频率稳定的优质正弦交流电压。分析研究了这种变换器的工作模式、稳态原理特性与电压瞬时值反馈控制策略，给出了变换器的外特性曲线以及变换器内阻对外特性的影响、关键电路参数设计准则。理论分析与原理试验表明，这种变换器具有高频电气隔离、电路拓扑简洁、两级功率变换( LFAC/HFAC/LFAC)、双向功率流、网侧功率因数较高、负载适应能力强、音频噪音小、负载短路时可靠性高、适合于高压输入小功率变换场合等特点。

高频脉冲交流环节逆变器电路结构由高频逆变器、高频变压器、周波变换器构成。在不增加电路拓扑复杂性的前提下，如何解决高频脉冲交流环节逆变器固有的电压过冲现象和实现周波变换器的软换流，是这类逆变器的研究重点。单极性移相控制高频脉冲交流环节逆变器能够将输入直流电压先调制成双极性三态的电压波，然后再解调成单极性SPWM波，经输出滤波后得到正弦电压。周波变换器功率开关是在前极输出的双极性三态的电压波为零期间进行开关转换，从而实现了ZVS换流。该文深入分析研究了高频脉冲交流环节逆变器稳态原理特性与单极性移相控制策略。采用状态空间平均法建立了逆变器平均模型，获得了输出电压、滤波电感电流、共同导通时间、单极性SPWM波占空比等关键电路参数的设计准则和逆变器的外特性曲线。设计并研制了lkVA 270VDC/115V400HzAC原理样机，试验结果证实了理论分析的正确性。这类逆变器具有电路拓扑简洁、两级功率变换( DC/HFAC/LFAC)、双向功率流、周波变换器实现了ZVS换流、单极性SPWM波、输出电压波形质量高、负载能力强等优点，包括全桥全波式、全桥桥式两种电路，前者适用于低压输出逆变场合，后者适用于高压输出逆变场合。