An optically written display based on up-conversion of near-infrared light is a newly emerging display technology. For filtering out unwanted colors from this light generator, multilayer dielectric color filters are designed for red, green, and blue screens, respectively. Layer-symmetric films are used in the designed filters and the conjugate gradient method is used to optimize the design. It is observed that the characteristics of the filters are good in the whole visible wavelength range when the incident angle is less than 40. The encompassed color triangle of the display with the color filters is larger than that without the color filters, and images with more saturated colors are obtained.

A dual-cell-gap transflective liquid-crystal display (TR-LCD) with identical response time in both the transmissive and reflective regions is demonstrated. In the transmissive region, strong anchoring energy is used to decrease the response time, while in the reflective region, weak anchoring energy is used to increase the response time. And overdrive voltage technology is adopted to make the response time identical in both the transmissive and reflective regions. The device structure and operating principle of the TR-LCD was analyzed, the anchoring energy in the transmissive and reflective regions was designed, and the response time and electro-optic characteristics of the TR-LCD was calculated. The simulated dual-cell-gap TR-LCD demonstrated good performances.

An achromatic quarter-wave film using one twisted-nematic liquid-crystal (TNLC) cell, a chromatic half-wave plate, and a chromatic quarter-wave plate is presented. The Jones matrix is used to calculate the optical properties of the system. An optimal algorithm is used for optimizing the configuration parameters. Simulation results indicate that the designed configuration is capable of turning a linearly polarized light into perfectly circularly polarized light in the wavelength range 400-700 nm. The manufacturing tolerance of the cell gap and twisted angle of the TNLC are good.

This paper proposes a method called Jump method for optimization of optical thin films. The method is the combination of local search strategy using modified Coordinate-Wise Algorithm and global search strategy using modified Evolutionary Algorithm. Jump method can evolve the designs of optical thin films for good performances. The design of a dielectric beam splitter and an edge filter as examples is carried out and the results indicate that Jump method is a very robust algorithm for optical thin film designs.

The methods of pixel arrangement for autostereoscopic liquid crystal displays based on conventional vertical parallax barriers are summarized. A novel method of pixel arrangement for autostereoscopic liquid crystal displays based on step parallax barriers is proposed. The pixel arrangements are given for different 10 inclined angles of parallax barriers and different column numbers of images. A demo of the autostereoscopic liquid crystal display using the new method of pixel arrangement presents very good stereo images. The results help to solve the process, storage and transmission of stereo images of autostereoscopic liquid crystal displays based on parallax barriers.