Low cost activated carbon was prepared from Polygonum orientale Linn by phosphoric acid activation. Its ability to remove the basic dyes, malachite green (MG) and rhodamine B (RB) was evaluated. The surface area of P. orientale Linn activated carbon (PLAC) was found to be 1398 m2/g. The effects of experimental parameters such as initial concentration, contact time, pH, ionic strength and temperature on the adsorption were investigated. Alkaline pH was more favorable for MG adsorption, whereas acidic pH was better for RB uptake. Adsorption of dyes on PLAC was weakly dependent on ionic strength. The adsorption kinetics was found to be best represented by the pseudo-second-order kinetic model. The mechanism of the adsorption process was determined from the intraparticle diffusion model. The equilibrium adsorption data was well described by the Langmuir model. Thermodynamic study showed that the adsorption was a spontaneous, endothermic process.

Arundo donax root carbon (ADRC), a new adsorbent, was prepared from Arundo donax root by carbonization. The surface area of the adsorbent was determined 158m2/g by N2 adsorption isotherm. Batch adsorption experiments were carried out for the removal of malachite green (MG) from aqueous solution using ADRC as adsorbent. The effects of various parameters such as solution pH (3-10), carbon dose (0.15-1.0 g/100 ml) and initial MG concentration (10-100 mg/l) on the adsorption system were investigated. The effective pH was 5-7 and the optimum adsorbent dose was found to be 0.6 g/100 ml. Equilibrium experimental data at 293, 303 and 313K were better represented by Langmuir isotherm than Freundlich isotherm using linear and non-linear methods. Thermodynamic parameters such as △G, △H and △S were also calculated. The negative Gibbs free energy change and the positive enthalpy change indicated the spontaneous and endothermic nature of the adsorption. The adsorption equilibrium time was 180 min. Adsorption kinetics was determined using pseudo-first-order model, pseudo-second-order model and intraparticle diffusion model. The results showed that the adsorption of MG onto ADRC followed pseudo-second-order model.

The adsorption of methyl orange and methyl violet from aqueous solutions by Phragmites australis activated carbon (PAAC) was studied in a batch adsorption system. The adsorption studies include both equilibrium adsorption isotherms and kinetics. Several isotherm models were investigated and the adsorption isotherm data were best represented by the Temkin isotherms. The kinetic data were well described by the pseudosecond-order kinetic model. The mechanism of the adsorption process was determined from the intraparticle diffusion model. The results indicate that PAAC could be employed as a low-cost alternative for the removal of the textile dyes from effluents.

In this paper, an activated carbon was prepared from Typha orientalis and then treated with KMnO4 and used for the removal of Basic Violet 14 from aqueous solutions. KMnO4 treatment influenced the physicochemical properties of the carbon and improved its adsorption capacity. Adsorption experiments were then conducted with KMnO4-modified activated carbon to study the effects of carbon dosage (250-1500 mg/L), pH (2-10), ion strength (0-0.5 mol/L), temperature, and contact time on the adsorption of Basic Violet 14 from aqueous solutions. The equilibrium data were analyzed by the Langmuir and Freundlich isotherms and fitted well with the Langmuir model. The pseudo-first-order, pseudo-second-order, and intraparticle diffusion models were used to evaluate the kinetic data and the pseudo-second-order kinetics was the best with good correlation.

Activated carbon was prepared from cattail by H3PO4 activation. The effects influencing the surface area of the resulting activated carbon followed the sequence of activated temperature > activated time > impregnation ratio > impregnation time. The optimum condition was found at an impregnation ratio of 2.5, an impregnation time of 9 hr, an activated temperature of 500°C, and an activated time of 80 min. The Brunauer-Emmett-Teller surface area and average pore size of the activated carbon were 1279 m2/g and 5.585 nm, respectively. A heterogeneous structure in terms of both size and shape was highly developed and widely distributed on the carbon surface. Some groups containing oxygen and phosphorus were formed, and the carboxyl group was the major oxygen-containing functional group. An isotherm equilibrium study was carried out to investigate the adsorption capacity of the activated carbon. The data fit the Langmuir isotherm equation, with maximum monolayer adsorption capacities of 192.30 mg/g for Neutral Red and 196.08 mg/g for Malachite Green. Dye-exhausted carbon could be regenerated effectively by thermal treatment. The results indicated that cattail-derived activated carbon was a promising adsorbent for the removal of cationic dyes from aqueous solutions.