聚变堆第一壁冷却剂中细颗粒运动沉积研究
首发时间:2026-11-19
摘要:聚变堆包层模块的第一壁直接面向等离子体,第一壁冷却剂负责冷却第一壁表面热流和中子沉积产生的核热,是确保装置安全稳定运行的核心要素。当冷却剂通道设计为圆形、矩形、准三角形等不同形状时,对应的流动传热和颗粒运动沉积特性会有不同的特点。以聚变堆包层模块第一壁为研究对象,选用矩形冷却剂通道,基于所建立的模型,对聚变堆第一壁冷却剂通道内的细颗粒运动沉积进行了计算。结果表明:在聚变堆氦冷第一壁冷却剂中,随着RAFM钢颗粒粒径的增大,总沉积率呈现先增大后减小的趋势,耦合中子热负载后,总沉积率依然呈现先增大后减小的趋势,但在颗粒粒径为1μm时,总沉积率比未耦合中子负载时减小明显;在聚变堆水冷第一壁冷却剂中,随着RAFM钢细颗粒颗粒粒径的增大,总沉积率呈不断增大的趋势,细颗粒在不同壁面上沉积情况不同,等离子体侧壁面上的颗粒沉积集中点多,且分布位置更靠近入口处;颗粒初始速度对总沉积率的影响较小,可以忽略;在颗粒粒径为1μm的尺度下,中子热负载对氦冷第一壁颗粒沉积特性的影响远大于水冷第一壁。
关键词: 聚变堆包层模块 第一壁 冷却剂 流场分布 细颗粒 运动沉积
For information in English, please click here
Research on the Movement and Deposition of Fine Particles in the Coolant of the First Wall of the Fusion Reactor
Abstract:The first wall of the fusion reactor blanket module faces directly towards the plasma, and the first wall coolant is responsible for cooling the surface heat flux of the first wall and the nuclear heat generated by neutron deposition, which is the core element to ensure the safe and stable operation of the device. When the coolant channel is designed in different shapes such as circular, rectangular, and quasi triangular, the corresponding flow, heat transfer, and particle movement and deposition characteristics will have different characteristics. Taking the first wall of the fusion reactor blanket module as the research object, a rectangular coolant channel was selected, and based on the established model, the motion and deposition of fine particles in the coolant channel of the first wall of the fusion reactor were calculated. The results show that in the helium-cooled first wall coolant of the fusion reactor, as the particle size of RAFM steel increases, the total deposition rate shows a trend of first increasing and then decreasing. After coupling neutron thermal load, the total deposition rate still shows a trend of first increasing and then decreasing. However, when the particle size is 1μm, the total deposition rate decreases significantly compared to uncoupled neutron load; In the water-cooled first wall coolant of a fusion reactor, as the particle size of RAFM steel fine particles increases, the total deposition rate shows a continuous increasing trend. The deposition of fine particles varies on different wall surfaces, and there are more concentrated particle deposition points on the plasma side wall surface, which are distributed closer to the inlet; The influence of initial particle velocity on total sedimentation rate is relatively small and can be ignored; At a particle size of 1μm, the effect of neutron thermal loading on the deposition characteristics of helium- cooled first wall particles is much greater than that of water-cooled first wall particles.
Keywords: fusion reactor blanket module first wall coolant flow field distribution fine particle movement and deposition
引用

No.****
动态公开评议
共计0人参与
勘误表
聚变堆第一壁冷却剂中细颗粒运动沉积研究
评论
全部评论