-
54浏览
-
0点赞
-
0收藏
-
0分享
-
65下载
-
0评论
-
引用
期刊论文
Thermal-rate treatment and critical thickness for formation of amorphous Al85Ni10Ce5 alloy
Materials Letters 57(2003)2460-2465,-0001,():
The effects of thermkal-rate treatment technique on the critical thickness of glass formation for an Al85Ni10Ce5 alloy melt have been investigated. The amorphous ribbon of the alloy with a thickness of 300μm is obtained using a single-roller melt-spinning technique by the thermal-rate tteatment, while that of 50μm is obtained at conventional melt superheavitn condition. The experiment shows that the coordiantion numbers of the Al85Ni10Ce5 alloy melt decreases from 12 to 9 with increasing melt temperature from 900 to 1200℃. The relationship between the corrdination numbers, the first position of the main peak of the alloy melt and the critical cooling rate for getting amorphous alloys has been discussed.
【免责声明】以下全部内容由[边秀房]上传于[2005年03月03日 17时48分12秒],版权归原创者所有。本文仅代表作者本人观点,与本网站无关。本网站对文中陈述、观点判断保持中立,不对所包含内容的准确性、可靠性或完整性提供任何明示或暗示的保证。请读者仅作参考,并请自行承担全部责任。
本学者其他成果
同领域成果