提示
冯吉才
-
88浏览
-
0点赞
-
0收藏
-
0分享
-
724下载
-
0评论
-
引用
期刊论文
Microstructure and strength of the TiAl/40Cr joint diffusion-bonded with Ti-V-Cu filler metal
，-0001，（）：
In this study, intermetallic TiAl and steel 40Cr are diffusion bonded successfully by using a composite barrien layer Ti/V/Cu. In this case, a diphase Ti3Al+TiAl layer and a Ti solid solution which enhance the strength of the joint are obtained at the TiAl/Ti interface. The interface of TiAl/Ti/V/Cu/40Cr was free from intermetallic compounds and other brittle phases, and the strength of the joint was as high as 420MPa, very close to that of the TiAl base. This method gives a reliable bonding of intermetallic TiAl and steel 40Cr.
【免责声明】以下全部内容由[冯吉才]上传于[2005年02月22日 17时48分25秒]，版权归原创者所有。本文仅代表作者本人观点，与本网站无关。本网站对文中陈述、观点判断保持中立，不对所包含内容的准确性、可靠性或完整性提供任何明示或暗示的保证。请读者仅作参考，并请自行承担全部责任。
本学者其他成果
同领域成果
