提示
刘天西
-
34浏览
-
0点赞
-
0收藏
-
0分享
-
49下载
-
0评论
-
引用
期刊论文
Polymer Nanocomposites Using Urchin-Shaped Carbon Nanotube-Silica Hybrids as Reinforcing Fillers
Macromol. Rapid Commun. 2004, 25, 1806-1864，-0001，（）：
Carbon nanotubes (CNTS) have been grown on MCM-41 supported Fe nanoparticles and the as-prepared (no further purification) CNT-silica hybrid was directly incorporated into nylon-6 (PA6) by simple melt-compounding.The urchin-shaped CNT-silica hybrid filler was observed to be homogeneously dispersed throughout the matrix by scanning electron and transmission electron microscopy.Compared with neat PA6,the tensile modulus and strength of the composite are greatly improved by about 110%,with incorporation of only 1 wt.-% CNT-silica filler.
【免责声明】以下全部内容由[刘天西]上传于[2007年09月11日 09时35分57秒]，版权归原创者所有。本文仅代表作者本人观点，与本网站无关。本网站对文中陈述、观点判断保持中立，不对所包含内容的准确性、可靠性或完整性提供任何明示或暗示的保证。请读者仅作参考，并请自行承担全部责任。
本学者其他成果
同领域成果
