提示
李益民
-
37浏览
-
0点赞
-
0收藏
-
0分享
-
111下载
-
0评论
-
引用
期刊论文
RHEOLOGICAL PROPERTIES OF METAL INVECTION MOLDING BINDER AND FEEDSTOCK①
Trans. Nonferrous Met. Soc. China Sep. 1997 Vol. 7 №.3 ，-0001，（）：
The fundamental rheological properties of metal injection molding (MIM) feedstock and binder are theoretically analysized. The viscosity of MIM binder and feedstock at different temperature and at different shear rate was measured and evaluated. The results indicated that MIM binder and feedstockpossess pseudoplastic rheological behavior. The Fe-Ni MIM feedstock prepared has the lower value of flow activation energy and the higher value of strain sensitivity exponent . Its injection and filling properties are good.
【免责声明】以下全部内容由[李益民]上传于[2005年05月16日 18时02分12秒]，版权归原创者所有。本文仅代表作者本人观点，与本网站无关。本网站对文中陈述、观点判断保持中立，不对所包含内容的准确性、可靠性或完整性提供任何明示或暗示的保证。请读者仅作参考，并请自行承担全部责任。
本学者其他成果
同领域成果
