The 2024/3003 alumintan gradient alloys are prepared by semi-continuous casting. The influences of throttle bore diameter of embedded nozzle and temperature of internal melt on composition distribution, macrestructure, hardness are analyzed, and the stability of gradient distribution of composition, macmstructure and hardness along the axial direction of the ingot is also studied. The results show that diffe-rent composition profiles can be achieved by adjusting the processing parameters; the volume fraction of inner ahoy in the ingot can be increased by enlarging the threttle bore diameter and elevating the temperature of inner melt; quasi-steady solidification can be realized within 20s during cast processing, and consistent quality ingot is obtained by controlling the casting speed and liquid height of inner melt.