In this paper, a robust fault detection and identification approach based on an adaptive observer is developed for uncertain continuous linear time-invariant systems with multiple discrete time-delays in both states and outputs. State and output faults of bias type that may evolve slowly or abruptly are considered, and the delay system is disturbed by unstructured bounded unknown inputs. Based on the scheme of [Trunov, A. B., & Polycarpou, M. M. (2000). Automated fault diagnosis in nonlinear multivariable systems using a learning methodology. IEEE Transactions on Neural Networks, 11, 91–101], a novel adaptive observer for detecting and estimating faults in the considered system is constructed, and robustness with respect to unknown inputs and sensitivity to faults of the detecting scheme are rigorously analyzed. The fault estimate and the state estimation error are then proved to be uniformly bounded. Finally, simulations of a heating process demonstrate that the proposed approach can detect the faults shortly after the occurrences without any false alarm and can approximate the faults with desired accuracy.

In recent years, robust fault diagnosis of nonlinear systems has received much more attention due to the universal existence of nonlinearities and model uncertainties in practice. By introducing a new adaptive law and sliding mode observers with boundary layer control into Polycarpou's online approximator, we propose a fast and robust fault diagnosis strategy for a class of nonlinear systems in this article. The robustness and stability are proved theoretically by the Lyapunov method and the detectability conditions as well as the upper bound of detection time are given, which demonstrate that the detection time of our strategy is much shorter than that of Polycarpou's approach. Simulation results on the three-tank system "DTS200" show the effectiveness and fastness of the proposed strategy.

In this article, an adaptive control approach–Adaptive Generic Model Control (AGMC) for a class of nonlinear time-varying processes with input time delay is proposed. First, a nonlinear state predictor (NSP) is introduced, which extends the conventional generic model control (GMC) to a class of nonlinear processes with input time delay. Then a class of nonlinear time-varying processes with input time delay is further considered. A modified strong tracking filter (MSTF) is adopted to estimate the timevarying parameters of the nonlinear processes, and the state estimates are then utilized to update the plant models used in the NSP and MSTF, this results in an adaptive generic model control scheme for a class of nonlinear time-varying processes with input time delay. A modified mathematical model of a three-tank-system is used for computer simulations, the results show that the proposed AGMC algorithm is satisfactory, and it has definite robustness against model/plant mismatch in the measurement noise.

This paper presents a solution to the joint time-varying time delay and parameter estimation of NARX (nonlinear autoregressive with exogenous inputs) processes, where only pure time delay in input signal is considered. A modified strong tracking filter (MSTF) is proposed, and is adopted as an adaptive estimation algorithm. Three kinds of specific NARX processes are considered. The first is also the simplest, the output signal is the input with time delay plus disturbance; The second one is a simple NARX process plus disturbance; The third NARX process even has unknown time-varying parameters. For each of the NARX processes, we set up a specific estimation model, with these models the proposed MSTF algorithm can be applied to the real-time time delay and parameter estimation of the above three NARX processes. Computer simulation results demonstrate the effectiveness of the proposed approach. Moreover the robustness of the proposed algorithm against some model:process parameter mismatches is also tested via computer simulations.

Combining the repetitive learning strategy and the optimality principle, this Letter proposes a time-delayed method to control chaotic maps. This method can effectively stabilize unstable periodic orbits within chaotic attractors in the sense of least mean square. Numerical simulations of some chaotic maps verify the effectiveness of this method.