已为您找到该学者20条结果 成果回收站
【期刊论文】Practical Receding-Horizon Optimization Control of the Air Handling Unit in HVAC Systems
李少远, Min Xu, †, Shaoyuan Li, *, and Wenjian Cai‡
Ind. Eng. Chem. Res. 2005, 44, 2848-2855,-0001,():
-1年11月30日
This paper is concerned with air handling units (AHUs), the performances of which directly influence those of heating, ventilation and air conditioning systems. An autotuning recedinghorizon optimization method is proposed to synthesize a proportional-integral-derivative (PID) type controller for AHUs. This algorithm is composed of two levels of control. The lower level adopts a conventional PID controller to obtain an acceptable, but not necessarily optimal, performance. The higher level provides optimal low-level controller parameters through minimization of the generalized predictive control criterion. Because the method does not require changes in hardware and the definitions of conventional controller parameters, it can be both easily accepted by process engineers and widely applied to industrial areas. Compared with the performance of a well-tuned conventional PID controller, simulation and experimental results show that the proposed method for AHU systems can achieve a better performance under a wide range of operating conditions.
-
200浏览
-
0点赞
-
0收藏
-
1分享
-
205下载
-
0
-
引用
【期刊论文】Multi-model predictive control based on the Takagi-Sugeno fuzzy models: a case study
李少远, Ning Li a, b, *, Shao-Yuan Lia, Yu-Geng Xia
Information Sciences 165(2004)247-263,-0001,():
-1年11月30日
Multiple model predictive control (MMPC) strategy based on the Takagi-Sugeno (T-S) model is proposed in this paper. A T-S modeling method using fuzzy satisfactory clustering (FSC) algorithm is introduced at first. FSC is designed to help quickly determine satisfactory number of rules of a T-S model. Based on the T-S model, MMPC strategy is presented using parallel distribution compensation (PDC) method, i. e. different predictive controllers are designed for different rules (local sub-systems). The global controller output is the fuzzy weighted integration of local ones. MMPC with system constraints are also considered in this paper. The presented modeling and controller design procedure is demonstrated on an MIMO simulated pH neutralization process. © 2003 Elsevier Inc. All rights reserved.
Multiple model predictive control (, MMPC), , Takagi-Sugeno (, T-S), models, Fuzzy satisfactory clustering (, FSC), , Parallel distribution compensation (, PDC),
-
154浏览
-
0点赞
-
0收藏
-
0分享
-
416下载
-
0
-
引用
李少远, Shaoyuan Lia, *, Yan Zhanga, Quanmin Zhub
Information Sciences 170(2005)329-349,-0001,():
-1年11月30日
This paper presents an effcient distributed model predictive control scheme based on Nash optimality, in which the on-line optimization of the whole system is decomposed into that of several small co-operative agents in distributed structures, thus it can signi ficantly reduce computational complexity in model predictive control of large-scale systems. The relevant nominal stability and the performance on single-step horizon under the communication failure are investigated. The Shell heavy oil fractionator benchmark control problem is illustrated to verify the effectiveness of the proposed control algorithm. © 2004 Elsevier Inc. All rights reserved.
Model predictive control (, MPC), , Distributed control system, Nash optimality, Multi-agent, Shell benchmark control problem
-
128浏览
-
0点赞
-
0收藏
-
1分享
-
177下载
-
0
-
引用
李少远, Qiang ZHANG, Shao-Yuan LI∗
,-0001,():
-1年11月30日
Performance assessment of control loops has got the attention of many researchers. This study focuses on performance assessment of model predictive control. An MPC-achievable benchmark is proposed based on subspace identification; the advantage of this benchmark is that only system input and output data is used and the state space model need not explicitly calculated during identification, in addition, it can be implemented to both univariate and multivariate process. Two performance measures can be constructed to assess the control loop, which can evaluate the potential benefit to update the new identified model. To find the potential benefit by tuning the parameter, tradeoff curves similar to LQG benchmark can be draw as reference. The effect of constraints imposed on process variables can be evaluated by the installed controller benchmark. Simulation about an industrial example was done using the proposed method.
Model Predictive Control,, Performance Assessment,, Subspace Identification,, MPC-achievable Benchmark
-
125浏览
-
0点赞
-
0收藏
-
0分享
-
238下载
-
0
-
引用
【期刊论文】A New Coordinated Control Strategy for Boiler-Turbine System of Coal-Fired Power Plant
李少远, Shaoyuan Li, Senior Member, IEEE, Hongbo Liu, Wen-Jian Cai, Yeng-Chai Soh, and Li-Hua Xie
IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY, VOL. 13, NO.6, NOVEMBER 2005,-0001,():
-1年11月30日
Abstract-This paper presents the new development of the boiler-turbine coordinated control strategy using fuzzy reasoning and autotuning techniques. The boiler-turbine system is a very complex process that is a multivariable, nonlinear, slowly time-varying plant with large settling time and a lot of uncertainties. As there exist strong couplings between the main steam pressure control loop and the power output control loop in the boiler-turbine unit with large time-delay and uncertainties, automatic coordinated control of the two loops is a very challenging problem. This paper presents a new coordinated control strategy (CCS) which is organized into two levels: a basic control level and a high supervision level. Proportional-integral derivative (PID) type controllers are used in the basic level to perform basic control functions while the decoupling between two control loops can be realized in the high level. A special subclass of fuzzy inference systems, called the Gaussian partition with evenly (GPE) spaced midpoints systems, is used to self-tune the main steam pressure PID controller's parameters online based on the error signal and its first difference, aimed at overcoming the uncertainties due to changing fuel calorific value, machine wear, contamination of the boiler heating surfaces and plant modeling errors. For the large variation of operating condition, a supervisory control level has been developed by autotuning technique. The developed CCS has been implemented in a power plant in China, and satisfactory industrial operation results demonstrate that the proposed control strategy has enhanced the adaptability and robustness of the process. Indeed, better control performance and economic benefit have been achieved.
Index Terms-Boiler-turbine coordinated control strategy,, decoupling control,, industrial application,, multivariable systems,, power plant.,
-
122浏览
-
0点赞
-
0收藏
-
1分享
-
678下载
-
0
-
引用