Carbon nitride films have been fabricated by a dc facing-target reactive sputtering system for various N2 fractions (PN) in the gas mixture. Complementary measurement techniques, including atomic force microscopy (AFM), x-ray photoelectron spectroscopy (XPS), Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR) and high-resolution transmission electron microscopy (HRTEM), were used to systematically study the morphology and microstructure of the films. AFM images show that the average surface roughness increases with increasing P-N. XPS analyses indicate that the concentration of N is not directly proportional to PN, and it rises quickly to a saturated value of similar to33 at% at a PN of 20%, which can be attributed to the chemical sputtering effect. The ratio N-C(sp2)/N-C(sp3) increases with increase in PN from 0% to 20%, and then decreases with further increase in P-N. However, the number of sp2-hybridized C atoms continues to increase over the whole range of PN, as evidenced by Raman and FTIR measurements. The growth of a disordered sp2 C structure at P-N below and above 20% can be attributed to the incorporation of N and the compressive stress relaxing, respectively. Raman scattering and HRTEM analyses reveal an incomplete ordering process of the sp2 C structure with increase in PN.