权高峰
高性能镁合金加工、生产技术和组织与性能表征;高强度铝合金结构疲劳行为与安全寿命评估;铝合金-镁合金固态焊接技术与装备研发; 铝基、镁基复合材料结构和器件设计与制备;机器零件和工程结构失效分析与防止
个性化签名
- 姓名:权高峰
- 目前身份:
- 担任导师情况:
- 学位:
-
学术头衔:
博士生导师
- 职称:-
-
学科领域:
材料科学
- 研究兴趣:高性能镁合金加工、生产技术和组织与性能表征;高强度铝合金结构疲劳行为与安全寿命评估;铝合金-镁合金固态焊接技术与装备研发; 铝基、镁基复合材料结构和器件设计与制备;机器零件和工程结构失效分析与防止
权高峰 教授,工学博士,博士生导师 交通运输装备轻量化创新团队,研究所所长 主要研究领域: 镁合金、铝合金加工及组织与性能表征 铝基复合材料、镁基复合材料设计与器件开发 金属材料强度学及机械零件与结构的失效分析与防止 国外工作经历: 联邦德国勃兰登堡工业大学,机械、电气技术与经济工程系研究教授,联邦德国GKSS研究中心科学家 国内工作经历: 西安交通大学助教、讲师、副教授 国家教育委员会科技司(教育部)项目官员 大连交通大学教授 西南交通大学教授 研究方向: 高性能镁合金加工、生产技术和组织与性能表征; 高强度铝合金结构疲劳行为与安全寿命评估; 铝合金-镁合金固态焊接技术与装备研发; 铝基、镁基复合材料结构和器件设计与制备; 机器零件和工程结构失效分析与防止 研究经历: 参加和主持了30余项包括联邦德国DFG,BMBF欧盟第六框架计划、国家自然科学基金重点项目和面上项目、国防军工配套等研究课题;获得多项科技奖励 承担多项铁道部、教育部和辽宁省轨道交通运输装备中的轻量化材料、结构和装备研发项目 学术/科技成果: 研制成功镁合金蜂窝板并开发了制造技术与装备; 研制成功高弹性模量的铝基复合材料国防装备部件,获部级鉴定成果一项,被评为国际先进水平; 成功开发出粉末冶金单模具法制备铝基复合材料技术首创应用三维图像表征多相材料的立体显微组织(获发明专利),被德国材料学会DGM推荐在双语刊物Practical Metallography /Praktische Metallographie发表; 运用数值还原技术研究了高强度铝合金电子加速器衍射/透射显微组织和数值化表征,澄清了关于轧制铝合金组织与性能各向异性中的第二相作用; 开发成功了应力场中金属中氢扩散的试验方法和装置,获美国Chappell青年科技奖提名。 申报国家发明专利15项,实用新型专利12项。获得授权发明专利4项,实用新型专利11项。 著作与论文: 发表学术论文110余篇;其中SCI, EI, ISTP 收录共80余篇次,SCI他引30余篇次
-
主页访问
2252
-
关注数
0
-
成果阅读
161
-
成果数
4
权高峰, 任凌宝;吴婧;权高峰
Materials Science & Engineering A,-0001,():
-1年11月30日
在573K~673K,1E-4~1E-2s-1的条件下研究了AZ80镁合金的塑性流变行为,应用Zener-Hollomon双曲线正弦本构方程计算了其表观激活能为172kJ/mol,应力指数为2.7±0.3.这表面非基面滑移随着高温下激活能的增加和位错攀移及晶粒转动而被激活,相应的组织演变及析出相析出机理也被加以详细分析。
AZ80镁合金, 低应变速率拉伸, 组织演变, 超塑性变形机理
-
70浏览
-
0点赞
-
0收藏
-
0分享
-
4下载
-
0评论
-
引用
【期刊论文】The Effect of Strain Rate on the Fractrure Modes of Mg Alloys
权高峰, Gaofeng Quan, a, Dachuan Zhu, b, Feng Yan, c and Zhaoming Liu, d
Advanced Materials Research Vols. 26-28 (2007) pp 1221-1226,-0001,():
-1年11月30日
Bending and impact tests were conducted on magnesium alloys AZ31 and AZ80 in different microstructure conditions. It is found that the strength parameters are increased quite a lot, and the ductility parameters (bending flection) decreasedwith increase in strain rate. The damaged surface analysis in SEM revealed that, the micro crack nucleation modes, icro crack coalescence and final crack path are varied with the stress state on the specimen, and the crack nucleation modes are varied with the initial strain rate. The effect of strain rate on fracture modes is discussed.
AZ31 Mg alloy, strain rate, fracture mechanism, fracture morphology
-
30浏览
-
0点赞
-
0收藏
-
0分享
-
86下载
-
0评论
-
引用
【期刊论文】Twinning and Twinned Bands Turning During Plastic Deformation in Rolled Mg Alloy AZ31
权高峰, Quan Gaofeng
Key Engineering Materials Vols. 345-346 (2007) pp 717-720,-0001,():
-1年11月30日
It is studied the deformation process by IN SITU surface morphology observation for Mg alloy AZ31 sheet in an SEM. It is found that the deformation starts phenomenologically from twinning process, making out of the first twinning in both intact crystallite grains and existing twinned bands by rolling process, and the secondary twinning in original twinned bands. As the plastic strain increases the twinned bands turn to transverse direction (TD) of the sheet in all three tensile directions: rolling direction (RD), TD and 45° to rolling direction (45). The turning characteristic of grain boundaries were dealt with as well.
Magnesium alloy, twinning, twinned band turning, grain boundary turning, plastic deformation
-
34浏览
-
0点赞
-
0收藏
-
0分享
-
54下载
-
0评论
-
引用
-
27浏览
-
0点赞
-
0收藏
-
0分享
-
113下载
-
0评论
-
引用