For all‐solution‐processed (ASP) devices, transparent conducting oxide (TCO) nanocrystal (NC) inks are anticipated as the next‐generation electrodes to replace both those synthesized by sputtering techniques and those consisting of rare metals, but a universal and one‐pot method to prepare these inks is still lacking. A universal one‐pot strategy is now described; through simply heating a mixture of metal–organic precursors a wide range of TCO NC inks, which can be assembled into high‐performance electrodes for use in ASP optoelectronics, were synthesized. This method can be used for various oxide NC inks with yields as high as 10 g. The formed NCs are of high crystallinity, uniform morphology, monodispersity, and high ink stability and feature effective doping. Therefore, the inks can be readily assembled into films with a surface roughness of 1.6 nm. Typically, a sheet resistance of 110 Ω sq−1 can be achieved with a transmittance of 88 %, which is the best performance for TCO NC ink‐based electrodes described to date. These electrodes can thus drive a polymer light‐emitting diode (PLED) with a luminance of 2200 cd m−2 at 100 mA cm−2.

Low cost and high conductivity make copper (Cu) nanowire (NW) electrodes an attractive material to construct flexible and stretchable electronic skins, displays, organic light-emitting diodes (OLEDs), solar cells, and electrochromic windows. However, the vulnerabilities that Cu NW electrodes have to oxidation, bending, and stretching still present great challenges. This work demonstrates a new Cu@Cu4Ni NW conductive elastomer composite with ultrahigh stability for the first time. Cu@Cu4Ni NWs, facilely synthesized through a one-pot method, have highly crystalline alloyed shells, clear and abrupt interfaces, lengths more than 50 μm, and smooth surfaces. These virtues provide the NW-elastomer composites with a low resistance of 62.4 ohm/sq at 80% transparency, which is even better than the commercial ITO/PET flexible electrodes. In addition, the fluctuation amplitude of resistance is within 2 ohm/sq within 30 days, meaning that at ΔR/R0 = 1, the actual lifetime is estimated to be more than 1200 days. Neither the conductivity nor the performances of OLED with elastomers as conductive circuits show evident degradation during 600 cycles of bending, stretching, and twisting tests. These high-performance and extremely stable NW elastomeric electrodes could endow great chances for transparent, flexible, stretchable, and wearable electronic and optoelectronic devices.

As an important energy‐saving technique, white‐light‐emitting diodes (W‐LEDs) have been seeking for low‐cost and environment‐friendly substitutes for rare‐earth‐based expensive phosphors or Pd2+/Cd2+‐based toxic quantum dots (QDs). In this work, precursors and chemical processes were elaborately designed to synthesize intercrossed carbon nanorings (IC‐CNRs) with relatively pure hydroxy surface states for the first time, which enable them to overcome the aggregation‐induced quenching (AIQ) effect, and to emit stable yellow‐orange luminescence in both colloidal and solid states. As a direct benefit of such scarce solid luminescence from carbon nanomaterials, W‐LEDs with color coordinate at (0.28, 0.27), which is close to pure white light (0.33, 0.33), were achieved through using these low‐temperature‐synthesized and toxic ion‐free IC‐CNRs as solid phosphors on blue LED chips. This work demonstrates that the design of surface states plays a crucial role in exploring new functions of fluorescent carbon nanomaterials.

Luminescent carbon dots (L-CDs) with high quantum yield value (44.7%) and controllable emission wavelengths were prepared via a facile hydrothermal method. Importantly, the surface states of the materials could be engineered so that their photoluminescence was either excitation-dependent or distinctly independent. This was achieved by changing the density of amino-groups on the L-CD surface. The above materials were successfully used to prepare multicolor L-CDs/polymer composites, which exhibited blue, green and even white luminescence. In addition, the excellent excitation-independent luminescence of L-CDs prepared at low temperature was tested for detecting various metal ions. As an example, the detection limit of toxic Be2+ ions, tested for the first time, was as low as 23 μM.

Highly epitaxial ZnO nanowire‐on‐nanoplate structures as efficient and transferable electron field emitters are reported here. Well‐faceted ZnO nanoplates can be used as efficient substrates for the epitaxial growth of nanowires with a sharp and high‐quality interface, which significantly improves its field emitter performance. Because of its scalable preparation, high performance and facile transfer, the novel material is of high potential for applications in various optoelectronic devices.