您当前所在位置: 首页 > 学者
在线提示

恭喜!关注成功

在线提示

确认取消关注该学者?

邀请同行关闭

只需输入对方姓名和电子邮箱,就可以邀请你的同行加入中国科技论文在线。

真实姓名:

电子邮件:

尊敬的

我诚挚的邀请你加入中国科技论文在线,点击

链接,进入网站进行注册。

添加个性化留言

已为您找到该学者20条结果 成果回收站

上传时间

2005年02月24日

【期刊论文】陶瓷复合钢管的研究和工业应用

郭志猛, 殷声, 林涛, 果世驹

,-0001,():

-1年11月30日

摘要

工厂已能用SHS-离心法生产出均匀质量直径φ800mm的陶瓷内衬钢管。在SHS-重力法中,铝热反应主要受气相反应控制,首次用此法生产出直径φ273mm的陶瓷内衬弯管。(其余由郭补)

陶瓷内衬钢管, SHS-离心法, SHS-重力法, 应用

上传时间

2005年02月24日

【期刊论文】Synthesis of nanosized tungsten powder

郭志猛, Guangfeng Lu, Zhimeng Guo, Ji Luo, Liying Zhang

,-0001,():

-1年11月30日

摘要

Nanosized tungsten powder was synthesized by means of different methods and conditions with nanosized WO3 powder; the powder and the intermediate products were characterized using XRD, SEM, TEM, B.E.T and SAXS(X-ray diffracto-spectrometer/Kratky small angle scattering goniometer). It has been shown that nanosized WO3 can be completely reduced to WO2 at 600℃ after 40min, and WO2 can be reduced to W at 700℃ after 90min, moreover, the mean size of W particles is less than 40nm. Furthermore, the process of WO3→WO2→W excelled that of WO3→W in getting stably nanosized tungsten powder with less grain size.

Nano-tungsten powders, Reduce, SAXS

上传时间

2005年02月24日

【期刊论文】钛酸锶陶瓷固化核废物性能研究①

郭志猛, 张瑞珠①, ②, 郭志猛①

,-0001,():

-1年11月30日

摘要

本文研究了钛酸锶(SrTiO3)陶瓷固化放射性废物(RAW)的晶体结构和浸出性能,通过试验证明,钛酸锶陶瓷固化体具有较高的密度,浸出率低,化学稳定性高,是固化放射性废物和进行最终地质处置的理想固化体。并展望了钛酸锶陶瓷固化放射性废物的前景。

晶体结构, 钛酸锶陶瓷, 浸出性能, 固化, 放射性废物(, RAW),

上传时间

2007年12月27日

【期刊论文】SHS将核废物固定于类矿石

郭志猛

,-0001,():

-1年11月30日

摘要

上传时间

2005年02月24日

【期刊论文】SrTiO3-Immobilization of Simulated HLW By SHS

郭志猛, Ruizhu Zhang ), )*, Zhimeng Guo), Chengchang Jia), Hua Zhang)

,-0001,():

-1年11月30日

摘要

Using chromium oxide (CrO3) as an oxidant, amples based Strontium Titanate (SrTiO3) synroc and model high-level wastes (Sr2+) were fabricated by the SHS-densification and tested. Sr2+ directly took part in the synthesis process. As a result, immobilization limitation issue is basically resolved. The results of PCT, XRD and SEM/EDS analysis show that the Strontium Titanate is high density, low leach rate and high property stability and the synthesis process is feasible in technology and economy. It is a durable material with high-level waste loading and is in favor for final geological disposal.

Strontium Titanate,, high-level waste(, HLW), ,, immobilization,, self-propagating high-temperatures synthesis(, SHS),

合作学者

  • 郭志猛 邀请

    北京科技大学,北京

    尚未开通主页