已为您找到该学者20条结果 成果回收站
【期刊论文】Diffusion induced stress in layered Li-ion battery electrode plates
张俊乾, Junqian Zhang, Bo Lub, Yicheng Songa, Xiang Ji
Journal of Power Sources 209 (2012) 220– 227,-0001,():
-1年11月30日
In this paper, structural configuration of layered Li-ion battery electrode plates is evaluated by analytically formulating the diffusion induced stress. Both symmetric electrode and asymmetric bilayer electrode are discussed. The thickness ratio and the modulus ratio of current collector to active plate are analytically identified to be the important influence parameters on the stress. Applying a material with smaller elastic modulus for current collector could reduce the peak stresses in both current collector and active plate. Increasing the thickness of current collector would reduce the stress in itself while promote the stress in active plate. Therefore, from mechanical viewpoint on designing an electrode, the material for current collector should be as soft and flexible as possible. And the thickness of current collector should be in an appropriate range. Basically, it should be as small as possible on the precondition that the mechanical strength is satisfied. Finally, effects of three charging conditions, i.e. uniform, galvanostatic, and potentiostatic, on the diffusion induced stress is discussed. It is found the maximum stresses for three cases are linear to the total amount of intercalated lithium ions. Based on the stresses, an optimized charging operation, i.e. first galvanostatic followed by potentiostatic, is suggested.
Lithium battery,, Multilayer electrode,, Current collector,, Lithiation,, Diffusion induced stress
-
164浏览
-
0点赞
-
0收藏
-
0分享
-
230下载
-
0
-
引用
张俊乾, Junqian Zhang a, *, Benniu Zhang b, Jinghong Fan b
International Journal of Solids and Structures 40(2003)6781-6797,-0001,():
-1年11月30日
This two-part contribution presents a novel and efficient method to analyze the two-dimensional (2-D) electromechanical fields of a piezoelectric layer bonded to an elastic substrate, which takes into account the fully coupled electromechanical behavior. In Part I, Hellinger-Reissner variational principle for elasticity is extended to electromechanical problems of the bimaterial, and is utilized to obtain the governing equations for the problems concerned. The 2-D electromechanical field quantities in the piezoelectric layer are expanded in the thickness-coordinate with seven one-dimensional (1-D) unknown functions. Such an expansion satisfies exactly the mechanical equilibrium equations, Gauss law, the constitutive equations, two of the three displacement-strain relations as well as one of the two electric field-electric potential relations. For the substrate the fundamental solutions of a half-plane subjected to a vertical or horizontal concentrated force on the surface are used. Two differential equations and two singular integro-differential equations of four unknown functions, the axial force, N, the moment, M, the average and the first moment of electric displacement, D0 and D1, as well as the associated boundary conditions have been derived rigorously from the stationary conditions of Hellinger–Reissner variational functional. In contrast to the thin film/substrate theory that ignores the interfacial normal stress the present one can predict both the interfacial shear and normal stresses, the latter one is believed to control the delamination initiation.
-
27浏览
-
0点赞
-
0收藏
-
0分享
-
212下载
-
0
-
引用
【期刊论文】Stiffness degradation induced by multilayer intralaminar cracking in composite laminates
张俊乾, Junqian Zhang a, *, K. P. Herrmann b
Composites: Part A 30(1999)683-706,-0001,():
-1年11月30日
this paper, the two-dimensional electromechanical coupling problems that a piezoelectric patch of finite size bonded to an elastic substrate are considered. A subdivision model that the single physical piezoelectric layer is mathematically divided into a number of thinner layers is proposed to analyze the electromechanical responses of the structures. Within each virtual sub-layer of the piezoelectric patch the electric displacement and normal stress in the axial direction are assumed to be linear functions of the thickness coordinate. Hellinger-Reissner variational principle for elasticity is extended to the systems of piezoelectric multi-materials. The governing equations that comprise one-dimensional di erential equations and integro-differential equations are rigorously derived from the stationary conditions of the variational functional along with substitution of the assumed electromechanical fields. The subdivision model satisfies all mechanical and electric continuity conditions across the virtual interfaces and the physical interface of piezoelectrics/substrate. The numerical solutions of the governing equations are conducted, and the convergence of the subdivision model is demonstrated.
A., Laminates, Multilayer matrix cracking
-
32浏览
-
0点赞
-
0收藏
-
0分享
-
167下载
-
0
-
引用
【期刊论文】An Energy-Based Statistical Model for Multiple Fractures in Composite Laminates
张俊乾, K. P. Herrmann
International Journal for Multiscale Computational Engineering, 1 (4) 1-21 (2003),-0001,():
-1年11月30日
A theory is developed to predict the evolution of transverse ply cracking in a composite laminate as a function of the underlying statistical fracture toughness and the applied load. Th e instantaneous formation of a matrix crack spanning both the ply thickness and the ply width is assumed to be governed by the energy criterion associated with the material fracture oughness, Γ, at the ply level. Assume multiple matrix fractures occur quasi statically and sequentially such that the ply cracks form one after another under the constant external load imposed on the specimen. Th e number of cracks, n, within the gauge length, 2L, is a discrete random variable for a given applied load, σ, because the fracture toughness varies with the location of fractures in a given specimen as well as from specimen to specimen. Th e probability function f (n, σ, L) of the discrete random variable, n, is determined from the fracture toughness distribution and the solution for the potential energy release rate. Consequently, the distribution of the crack density, dn-n/2L, is obtained. Finally, the mean crack density is formulated as a function of the applied load.
composites,, multiple cracks,, thickness effect,, probabilistic model,, fracture toughness
-
48浏览
-
0点赞
-
0收藏
-
0分享
-
163下载
-
0
-
引用
张俊乾, M. Taj, J.Q. Zhang
,-0001,():
-1年11月30日
-
52浏览
-
0点赞
-
0收藏
-
0分享
-
143下载
-
0
-
引用