已为您找到该学者19条结果 成果回收站
肖鹏, 徐永东, 张立同, 成来飞
航空学报,2001,22(2):125~129,-0001,():
-1年11月30日
连续同步复合法是一种建立在传统CVI原理基础上的制备碳布增韧陶瓷基复合材料的新工艺,在制备过程中碳布通过连续缠绕在旋转的石墨衬底上,使纤维预制体的制备与基体的热解沉积同步进行,从而实现增韧相与基体在宏观和微观尺度上同步复合。通过控制反应物气体浓度、沉积温度与碳布缠绕线速度,达到控制微观孔隙网络与宏观孔隙的协调致密化。采用连续同步复合法制备碳布增韧SiC基复合材料,实际密度可达其理论密度的93%,制备周期显著缩短。
连续同步复合法, 陶瓷基, 复合材料, CVI, 制备工艺
-
40浏览
-
0点赞
-
0收藏
-
0分享
-
51下载
-
0
-
引用
肖鹏, 熊翔, 张红波, 黄伯云
中国有色金属学报,2005,15(5):667~674,-0001,():
-1年11月30日
通过分析合成材料、粉末冶金材料、C/C和C/C-SiC复合材料等摩擦材料的特点及其性能,指出C/C-SiC复合材料是一种能满足高速高能载制动的高性能陶瓷制动材料。综述了先驱体转化法、化学气相浸渗法和反应熔体浸渗法制备C/C2SiC复合材料的优点及其不足,指明了反应熔体浸渗工艺是一种具有市场竞争力的工业化生产技术。介绍了我国研制的C/C-SiC陶瓷制动材料的组织结构、力学性能、摩擦磨损性能及其应用,并对C/C-SiC陶瓷制动材料的性能特点进行了评述。
C/, C-SiC, 摩擦材料, 摩擦磨损, 制备方法
-
52浏览
-
0点赞
-
0收藏
-
0分享
-
50下载
-
0
-
引用
肖鹏, 徐永东, 张立同, 成来飞
无机材料学报,2000,15(5):903~908,-0001,():
-1年11月30日
旋转CVI是在CVI原理基础上发展的一种制备C/SiC复合材料的新工艺,通过石墨衬底的旋转,使预制体的制备与基体的沉积同步进行,能有效消除一般CVI工艺过程中存在的“瓶颈”效应。在自制的旋转CVI设备上实验,探索了旋转CVI工艺参数中CH3SiC13h(MTS)的流量与浓度、沉积温度和C布缠绕线速度对SiC基体沉积速度,以及沉积温度对基体结构的影响。并在低压(5kPa)、高温(1100℃)、400mL•min-1H2、200ML•min-1Ar、MTS40℃与C布以1.1-3.5mm-minll的线速度连续旋转的沉积条件下,实现了单丝纤维间微观孔隙、纤维束之间以及C布层间宏观孔隙的致密化同步完成。
旋转CVI, C/, SiC复合材料, 沉积速度, 基体结构
-
62浏览
-
0点赞
-
0收藏
-
0分享
-
49下载
-
0
-
引用
肖鹏, 徐永东, 黄伯云
硅酸盐学报,2002,30(2):240~243,-0001,():
-1年11月30日
为缩短CVI法制备C/SiC复合材料的工艺周期并降低成本,研究了CVI工艺过程中沉积温度、MTS(CH3SiC13)摩尔分数和气体流量对SiC沉积速率和MTS有效利用率的影响。实验结果表明:提高沉积温度,常压下1100℃时增大MTS摩尔分数(11%→19%),都有利于提高SiC沉积速率;提高沉积温度和降低反应物气体流量,能提高MTS有效利用率。在优化的工艺条件下,预制体的微观孔隙内沉积了致密的SiC基体,沉积速率达到142μm/h左右,并有效消除了基体中裂纹的形成.MTS的有效利用率为11%~27%。
碳/, 碳化硅, 化学气相浸渗, 沉积速率, 有效利用率, 复合材料
-
58浏览
-
0点赞
-
0收藏
-
0分享
-
47下载
-
0
-
引用
【期刊论文】Continuous synchronous composite process for fabricating carbon/silicon carbide composites
肖鹏, P. Xiao *, Y.D. Xu, L.T. Zhang, L.F. Cheng, Z.F. Chen
Materials Science and Engineering A313(2001)244-250,-0001,():
-1年11月30日
The continuous synchronous composite (CSC) process is a new technique, the preparation of reinforcement-phase accompanied simultaneously the deposition of SiC matrix, based on CVI principles for fabrication of ceramic matrix composites. In the CSC process, there was a gradient temperature field on the surface of the graphitic substrate, consisting of high (1000-1200℃), intermediate (900-1000℃) and low (700-900℃) temperature regions, by a bottom heating-element. Following the rotating substrate, micro-pores were well infiltrated in the intermediate temperature regions by gas diffusion transport, and macro-pores were rapidly filled with SiC in the high temperature regions by gas flow transport, respectively. In the present paper, 2-dimension carbon cloth reinforced SiC composites was fabricated by CSC process, and the microstructure, deposition rate and conversion efficiency of methyltrichlorosilane (MTS) were investigated. The densification of C/SiC composites was uniform, and the highest deposition rate within macro-pores was 25μm h−1, and the conversion efficiency of MTS varied from 11% to a maximum of 27%.
Continuous synchronous composite, Carbon/, silicon carbide, Microstructure, Deposition rate, Conversion efficiency
-
57浏览
-
0点赞
-
0收藏
-
0分享
-
42下载
-
0
-
引用